The structure of the heavy shelves, storage in Beijing?

Beijing heavy shelves structure: heavy shelves consists of columns, beams, braces, brace and self-locking bolt assembly and become, can effectively prevent the bolt looseness caused shelves after buckling; Beam with special cold rolling P type held beam; The structure is simple, reliable, light weight, strong bearing capacity, the characteristics of low cost; Post CARDS and column connection with a specially designed safety pin, can make sure the beams under impact force does not fall off; Layer board USES the international on the strip layer board, has a strong bearing capacity, wear resistance, change of the characteristics of simple, the maintenance cost is low.

Beijing heavy shelves

Compared with ordinary heavy shelves don't need to channel operation, so the space utilization rate is increased by 60%; Follow the principle of first in first out tray operation; Automatic storage of rotary; Storage and has chosen two separate actions greatly improve the output, because it is the gravity sliding to the goods, and there is no channel operation, and so reduce the number of road transport line and forklift. On the shelves of each layer of the channel, fitted with a certain slope, with guide rail, storage unit of the goods under the action of gravity, from the incoming flow to the outbound side. Such a warehouse, channel between rows with no homework, greatly improving the utilization rate of the warehouse. But, when using Z good one row, of the goods on the same layer, should be of the same goods or an inbound and outbound goods at the same time. The height is adjustable, match with various types of Beijing heavy shelves forklift or storage truck, Beijing heavy shelves can realize quick access to all kinds of tray, unit goods big Z carrying up to 5000 kg, is commonly used in all walks of life Z way of storage.

(1) according to the above information, the first will be calculated according to the size of the pallet racking for beam length, the length of the two trays and trays and trays and trays and the space between the shelves column, our standard usually was $100, or 1200 * 2 + 300 = 2700, and calculate the 2700 is the size of the shelf;

(2) according to the calculation of beam length, each layer of bearing calculate shelf material needed, namely 120 holding beams;

(3) the goods height 1100, each layer between beam and the goods need to leave the safe distance of 150 (safety fork distance), which is 1250 * 3, and top goods leaving 500 can normally, can be calculated according to this shelf height is 1250 * 3 + 120 (beam height) * 3 + 500 = 4610, usually pillar for the pitch of 75, thus column height is 4800 h.

(4) the depth of the tray is in the 1000, 100 in design we will often reduce, thus convenient goods normal is put on the shelf;

Above, can calculate the size of heavy beams racking for: 2700 * 4800 * 900 d h l;

Suitable for limited space variety, less number of cases, it can increase the utilization rate of a few times on the existing site, can be used with elevator operation. All composite structure, special light steel floor, low cost, fast construction. According to actual site and needs, flexible, multilayer, make full use of space on the second floor.

官网：http://www.kldats.cn